DirectPCR Lysis Reagent產品問與答


產品介紹: 一個步驟完成gDNA萃取, 加熱完, 直接取Crude lysates PCR, 完成Genotyping基因型鑑定。Certain compounds in animal tissues and cells inhibit PCR reactions. DirectPCR Lysis Reagents(Patent Pending) contain inhibitors of these PCR inhibitors. Therefore, DNA released in DirectPCR reagents iscompatible for one-step PCR genotyping.



DirectPCR Lysis Reagent (Cell)以細胞為例
Cat # 301-C, 302-C



1. Suspend cells from a 10 cm plate in 200–300 μl DirectPCR Lysis Reagent (Cell) containing freshly prepared 0.2-0.4 mg/ml Proteinase K (Sigma, cat # p6556, not included). Proteinase K is stable in DirectPCR reagents for ~24hrs. If a small number of cells are processed, and therefore it is difficult to weigh Proteinase K powder, use genomic PCR-quality Proteinase K solution (Viagen, cat #501-PK) at 0.5-1.0 mg/ml (25-50 μl Proteinase K solution per 1 ml
DirectPCR reagent). NOTE: For a small number of cells, dilute DirectPCR Reagent with distilled water up to 10times and then use a proportionally larger volume of lysates for PCR (see Table 1).



2. Rotate the tubes in rotating hybridization oven at 55°C for 5-6 hrs or until no clumps are observed. If necessary,rotation can be allowed overnight without loss of efficacy. Complete lysis is important. For more reproducible results,re-position once the tubes by shaking the bottles containing tubes, preferentially after 2-3 hrs. NOTE: Rotating hybridization oven performs better than rocking plate. Use 0.75 cm tubes for less than 150 μl of DirectPCR Reagent(Cell). DNA fragmentation by prolonged rotation will not influence significantly PCR performance. Use roughly proportional volume of DirectPCR Lysis Reagent for different sized samples.


3. Incubate crude lysates at 85°C for 45 min by floating the whole rack (containing tubes) on a water bath.(Optional) Precipitate hairs by centrifuging for 10 sec before step 4. Crude lysates may be stored at -20°C for 1 year(or at 4°C for 1 week) without losing efficacy.



4. Use 0.5-1.0 μl of lysate for 50 μl PCR reaction. Eppendorf Hotmaster Taq Polymerase (cat# 954-14-5018), SigmaJumpStart Taq DNA Polymerase (cat# D9307), or Qiagen HotStar Taq DNA polymerase (cat# 203203) is recommended for PCR.
Rescue of DNA: DNA in crude lysates can be rescued for further analysis. Add NaCl to a final concentration of 250mM, and then add 0.7 volume of isopropanol. DNA will form precipitates. Centrifuge at 4°C for 2 min, discard supernatant, wash DNA with 1 ml 70% EtOH, and dissolve DNA in 50 μl 10 mM Tris-HCl (8.0). Use 1 μl for PCR.


Table 1. Suggested starting lysis conditions for cultured mammalian cells.
Size of plate (# cells) Tube size (ml) DirectPCR-Cell (μl) Dilution (fold) Lysates (μl)/50 μl PCR rxn.
* Lysis using rotation hybridization oven. ** Lysis using rocking plate. Wash cells in 96-well plate twice with phosphate buffered saline and add 60 μl DirectPCR Reagent (Cell), which has been 2-fold diluted. Incubate at 55°C overnight. Place the 96-well plate in the wet chamber and float the chamber on the 85°C water bath for 1.5 hrs. Pipette up and down several times. Take 1 μl of lysates for PCR.


Products Description Cat # Price (US $)
DirectPCR-Tail 500 mouse tails (100 ml) 102-T


DirectPCR-Ear 500 mouse ears (50 ml) 402-E


DirectPCR-Yolk sac Yolk sac (100 ml) 202-Y


DirectPCR-Cell Cultured cell (100 ml) 302-C


Proteinase K Solution All types of tissues (100 mg) 501-PK


Important Technical Tips



1. Complete lysis. Big tissue clumps should not be observed after digestion. It is recommended to vigorouslyshake the bottle (containing microfuge tubes) for 2-3 sec anytime, once or twice, after tissues begin to partiallydissolve. This will physically disperse partially digested tissues and reposition microfuge tube, in which tails areseparated from lysis reagents, thereby facilitating overall lysis efficiency,


2. Proteinase K inactivation. Inactivation of proteinase K by incubating samples at 85C-86C for 45-50 min iscritical to protect Taq polymerase from proteinase K.



3. Taq polymerase. We have tested many types of commercially available Taq polymerases. The listed enzymesare recommended for optimal results.


4. Tissue size. The size of tails should be 0.5 cm or slightly smaller. Use a minimal volume (0.5-1 μl for 50 μl PCRreaction) of crude lysates for PCR amplification. Too much DirectPCR reagents inhibit PCR efficiency.


5. Small tubes and evaporation. To minimize evaporation, use a 0.75 ml tube when the reagent volume is less than 100 μl.


6. Small samples and dilution. If the required DirectPCR reagent volume is less than 50 μl, dilute the reagent by up to 2-fold with water, while maintaining the same concentration of proteinase K. If the DirectPCR reagent is '2-fold' diluted, apply '2-fold' more crude lysates for PCR reaction.



7. PCR machine. PCR machines are occasionally a source of technical problems.

arrow
arrow
    全站熱搜

    太鼎生物科技 發表在 痞客邦 留言(0) 人氣()