加拿大INFINITY 3-1研究級彩色數位影像系統(致冷型)CCD
太鼎生物科技有限公司 (02)86609496
系統規格:
核心感測元件:
1. 影像感應器:2/ 3” Sony ICX285 1.4百萬像素彩色cooled CCD
2. 有效像素:1392x1040, 6.45 um square pixels
3. 幀率(Frame Rate):15 fps(全解析度),可藉由像素合併提高
4. 數位輸出:8 and 12-bit
5. 暗電流:0.15 electrons / pixels / when cooled
6. 轉換雜訊(Read Noise):8 e- rms
7. 致冷能力:25 degrees Celsius below ambient
控制元件:
1. 供電:外接電源
2. 操作溫度:攝氏0度~50度
3. ROI(Region Of Interest):滑鼠自由選擇
4. 自動曝光:自動/手動
5. 白平衡:自動/手動
6. Gain:可調整/1 到 10x
7. 連接介面:標準USB 2.0高速介面
8. 尺寸(L x W x H):3.85 x 3.50 x 2.446 inches
9. 轉接口:C型接口
10. 像素合併(Binning):2x2, 3x3, 4x4
Lumenera Infinity 3-1 Color CCD Camera
- The Lumenera Infinity 3-1 is a 1.4 megapixel cooled color CCD camera, with 1392 X 1040 resolution and on-board processing.
- Uncompressed images in live streaming video and still-image capture are provided across a USB 2.0 digital interface.
- No frame grabber required is required with the Lumenera Infinity 3-1.
- On-board memory is available for frame buffering.
- The Lumenera Infinity 3-1 CCD Camera comes installed with a clear non-ir blocking filter. We recommend you add an IR/UV Blocking filter as an accessory to this camera.
|
Lumenera Infinity 3-1 Color CCD Camera
Lumenera’s Infinity 3-1 cooled CCD camera is designed to be used in a wide variety of scientific applications. Cooled models are ideal in low-light conditions and where high dynamic range is required. With 1392 x 1040 resolution and on-board processing, these cameras deliver outstanding image quality and value for industrial and scientific imaging applications.
Uncompressed images in live streaming video and still-image capture are provided across a USB 2.0 digital interface. No framegrabber is required. On-board memory is available for frame buffering. The Infinity 3-1 camera is supported by an experienced team of technical support and imaging experts who understand your imaging needs and are available to help you get the most out of your camera.
Lumenera Infinity 3-1 Color CCD Camera Features...
- High-speed USB 2.0 (480Mbits/sec) interface for ease of installation with any computer
- Cooled feature reduces thermal noise during low light fluorescent imaging
- Low noise progressive scan 1.4 megapixel CCD image sensor
- Crisp quality for the most demanding brightfield, phase contrast, and fluorescent applications including GFP, FISH, NIR, FRET, life science and geology
- 15 fps at full 1392x1040 resolution
The INFINITY3-1 includes INFINITY ANALYZE software for advanced camera control, image processing, measuring and annotation, and INFINITY CAPTURE, an intuitive user interface which includes all of the basic features needed to control your INFINITY camera and capture images.
About The Sony ICX285AL Interline CCD Chip...
The Sony ICX285AL is a diagonal 11 mm (Type 2/3) interline CCD solid-state image sensor with a square pixel array. High sensitivity and low smear are achieved through the adoption of EXview HAD CCD technology. Progressive scan allows all pixel’s signals to be output independently within approximately 1/15 second. Also, the adoption of high frame rate readout mode supports 60 frames per second.
This chip features an electronic shutter with variable charge-storage time which makes it possible to realize full-frame still images without a mechanical shutter. This chip is suitable for image input applications such as still cameras which require high resolution, etc.
The Sony ICX285AL Interline Features...
- Progressive scan allows individual readout of the image signals from all pixels
- High horizontal and vertical resolution (both approximately 1024 TV-lines) still images without a mechanical shutter
- Supports high frame rate readout mode (effective 256 lines output, 60 frame/s)
- Square pixel - Aspect ratio: 4:3 - Horizontal drive frequency: 28.64 MHz
- High sensitivity, low smear. Low dark current, excellent anti-blooming characteristics.
- Continuous variable-speed shutter. Horizontal register: 5.0 V drive
- Substrate material: Silicon - Image size: Diagonal 11 mm (Type 2/3)
- Total number of pixels: 1434 (H) × 1050 (V) approx. 1.50M pixels
- Number of effective pixels: 1392 (H) × 1040 (V) approx. 1.45M pixels
- Number of active pixels: 1360 (H) × 1024 (V) approx. 1.40M pixels
- Chip size: 10.2 mm (H) × 8.3 mm (V) - Unit cell size: 6.45 μm (H) × 6.45 μm (V)
- Optical black: Horizontal (H) direction: Front 2 pixels, rear 40 pixels, Vertical (V) direction: Front 8 pixels, rear 2 pixels
- Number of dummy bits: Horizontal 20, Vertical 3
Lumenera Product Number: I31C |
留言列表